| Continuous Flight - Cast in Place |
| CENTER BORE |
3” (75mm)
4” (100mm)
5” (125mm) |
| LENGTHS |
5 ft. (1.5m)
10 ft. (3m)
20 ft. (6m) |
| TEETH |
Dirt
Rock |
| Continuous Flight - Hexagon Core |
| HEX CONNECTION |
1 5/8” ID and 2” ID |
| LENGTHS |
5 and 10 ft. |
| DIAMETERS |
5 to 18” |
| Continuous Flight - Construction |
| HEX CONNECTION |
2 to 3” |
| LENGTHS |
5, 10 and 20 ft. |
| DIAMETERS |
to 48” |
| Dirt Augers - FDD |
| USE |
Soil and Sand |
| TYPES |
Double and Single Cut |
| OAL |
48” Double Cut/Double Carry (60” Double Cut/Single Carry) |
FLIGHT
|
1-1/2” thick, diameter 1-1/2” smaller than cut diameter |
| HUBS |
130MM, 150MM, 177MM, 200MM |
| CENTER TUBE |
6”OD x 1”W to 12”OD x 1”W –specific to hub size |
| HOLDERS |
WO-5 |
| TEETH |
201, 211, 134 Dirt Teeth |
| PILOT BIT |
TF-1000 |
| USE |
Fracturable Rock |
| TYPES |
Semi-flat |
| OAL |
48” and 60” |
FLIGHT |
Cast Head on 16” cut-48” cut. (Mfg. Head on 54” cut-72” cut.) |
| HUBS |
1-1/2” thick lead, 1” carry flight (Flight dia. will be 1-1/2” smaller than cut diameter.) |
| CENTER TUBE |
S-400, S-425, S-450, S-500 |
| HOLDERS |
5” OD x 1”W |
| TEETH |
C-30 style holders on Mfg. Head |
| PILOT BIT |
C31HD style teeth |
| Rock Augers - FBR |
| USE |
Fracturable Rock |
| TYPES |
Semi-flat and Spiral Cut |
| OAL |
48” Double Cut/Double Carry, 60” Double Cut/Single Carry |
FLIGHT |
1-1/2” thick, dia 1-1/2” smaller than cut diameter, hardfaced |
| HUBS |
130MM, 150MM, 177MM, 200MM |
| CENTER TUBE |
6”ODx 1”W to 12”OD x 1”W –specific to hub size |
| HOLDERS |
C-30 style holders on augers 60”-144” Dia. (B43 style holders on augers 60”-144: Dia.) |
| TEETH |
C31HD style bullet teeth on auger up to 54” dia. (B47 style teeth on augers 60”-144” dia.) |
| PILOT BIT |
C31 HD cluster with 2-1/2" sq. stem on augers 24”-54” dia. (B47 cluster with 2-1/2” sq. stem on augers 60”-144” dia.) |
For hard rock.
